Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 134 Installation & Operation Manual
Honeywell
5.13.1.8.1.1 Workflow Installation and Configuration settings for MSC-L 1010BJ and 1010RT Emula-
tion
To configure a MSC-L device to run Local and Remote loading, you
should install two workflows as given below:
1. 1010BJLocal.xml / 1010RTLocal.xml workflow to run in local mode.
2. 1010BJRemote.xml / 1010RTRemote.xml workflow to run in remote
mode.
Main Menu. Device. Workflow settings. Options. Workflow selection = <
Default>
Install 1010BJLocal.xml / 1010RTLocal.xml workflow.
To Install 1010BJLocal.xml / 1010RTLocal.xml:
Transfer. Install configuration. <1010BJLocal.xml / 1010RTLocal.xml>
NOTE: After installation device reboot automatically.
Main Menu. Device. Workflow settings. Options. Workflow selection = <
Custom>
Install 1010BJRemote.xml / 1010RTRemote.xml workflow.
To Install 1010BJRemote.xml / 1010RTRemote.xml:
Transfer. Install configuration. <1010BJRemote.xml /
1010RTRemote.xml>
NOTE: After installation device reboot automatically.
Main Menu. Device. Workflow settings. Options. Workflow selection = <
Default>
Main Menu | Device | Workflow settings | Options | Workflow mode = <
Remote>
Reboot the device manually, after the configuration settings are done.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English