LCD Panel Menus
The LCD panel has three menus: Idle, Status, and Maintenance. You can toggle
between the LCD panel menus by pressing the Menu button and navigate through
the menu options by pressing the Enter button.
Table 3 on page 11 describes the LCD panel menu options.
Table 3: LCD Panel Menu Options in EX4500 Switches
DescriptionMenu
In the Idle menu:
■
Press Enter to cycle through the Status LED modes, which are port status
indicators:
■
ADM (administrative status)
■
DPX (duplex)
■
SPD (speed)
See “Network Port and Uplink Module Port LEDs in EX4500 Switches” on
page 15 for information on the Status LED modes.
■
Press Menu to exit the Idle menu and go to the Status menu.
IDLE
The Status menu has the following options:
■
Show PSU Status—Choose one of the following:
■
Press Enter to display the status of power supplies: OK, Fld (Failed),
ABS (Absent).
■
Press Menu to go to the next option in the Status menu.
■
Show Environment Status—Choose one of the following:
■
Press Enter to display the status of the fan tray and the chassis
temperature:
■
Fan tray status: OK, Fld, ABS
■
Chassis temperature status: OK, High, Shutdown
■
Press Menu to go to the next option in the Status menu.
■
Show JUNOS Version Status—Choose one of the following: .
■
Press Enter to display the version of JUNOS Software for EX Series
switches loaded on the switch.
■
Press Menu to go to the next option in the Status menu.
■
EXIT STAT MENU?—Choose one of the following:
■
Press Enter to exit the Status menu.
■
Press Menu to return to the Show PSU Status option.
You can disable the Status menu or the options in the Status menu in the LCD
panel. See Configuring the LCD Panel on EX Series Switches (CLI Procedure).
STATUS
LCD Panel in EX4500 Switches ■ 11
Chapter 2: Component Descriptions
To Next Page
Loading...
Need help?
General