Juniper EX4500 Series User Manual

male end of the power cord fits into the power source outlet that is standard for your
geographical location.
NOTE: In North America, AC power cords must not exceed 4.5 meters (approximately
15 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8
(NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3).
The cords shipped with the switch are in compliance.
Table 24 on page 58 lists the AC power cord specifications for an EX4500 switch for
the countries and regions listed in the table.
Table 24: AC Power Cord Specifications for an EX4500 Switch
Plug StandardsElectrical SpecificationsCountry/Region
AS/NZS 3112250 VAC, 15 A, 50 HzAustralia
GB 1002250 VAC, 16 A, 50 HzChina
CEE (7) VII250 VAC, 16 A, 50 HzEurope (except Italy,
Switzerland, and United
Kingdom)
CEI 23-16250 VAC, 16 A, 50 HzItaly
NEMA L6–20250 VAC, 16 A, 50 HzJapan
NEMA 5–15125 VAC, 15 A, 50 HzNorth America
SEV 1011 SEV 5934/2250 VAC, 16 A, 50 HzSwitzerland
BS 1363/A250 VAC, 13 A, 50 HzUnited Kingdom
Figure 22 on page 59 shows the plug on the power cord for each country and region
listed in Table 24 on page 58.
58 ■ AC Power Cord Specifications for an EX4500 Switch
Complete Hardware Guide for EX4500 Ethernet Switches

Juniper EX4500 Series Specifications

General

Brand	Juniper
Model	EX4500 Series
Category	Switch
Language	English