Juniper MX10008 User Manual

Table 5: CLI Equivalents of Terms Used in Documentation for MX10008 Routers
Additional Information
Item In
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
“MX10008 Chassis
Physical Specifications”
on page 36
Router chassis–JNP10008
[MX10008]
Chassis
“MX10008 Routing and
Control Board
Description” on page 77
n is a value in the range
of 0–1.
Multiple line items appear
in the CLI if more than
one RCB is installed in
the chassis.
CB (n)Routing and
Control
Board
Understanding Interface
Naming Conventions
Line card (The router
does not have actual
FPCs—the line cards are
the FPC equivalents on
the router.)
n is a value in the range
of 0–7. The value
corresponds to the line
card slot number in which
the line card is installed.
Abbreviated name
of the Flexible PIC
Concentrator
(FPC)
On MX10008, an
FPC equates to a
line card.
FPC (n)
“MX10008 Optical
Transceiver and Cable
Support” on page 119
Optical transceiversn is a value equivalent to
the number of the port in
which the transceiver is
installed.
Abbreviated name
of the transceiver
Xcvr (n)
One of the following:
•
JNP10K-PWR-AC
Power Supply on
page 61
•
JNP10K-PWR-AC2
Power Supply
•
JNP10K-PWR-DC
Power Supply on
page 65
•
JNP10K-PWR-DC2
Power Supply
AC, DC, HVAC, or
HVDC power supply
n is a value in the range
of 0–5. The value
corresponds to the power
supply slot number.
One of the
following:
•
JNP10K-PWR-AC
•
JNP10K-PWR-AC2
•
JNP10K-PWR-DC
•
JNP10K-PWR-DC2
PSU (n)
“MX10008 Cooling
System and Airflow” on
page 45
Fan tray–JNP10008-FAN or
JNP10008-FAN2
Fan tray
34

Juniper MX10008 Specifications

General

Brand	Juniper
Model	MX10008
Category	Network Router
Language	English