MX10008 Routing and Control Board Components
and Descriptions
IN THIS SECTION
MX10008 Routing and Control Board Description | 77
MX10008 Routing and Control Board LEDs | 80
MX10008 Routing and Control Board Description
IN THIS SECTION
Routing and Control Board Functions | 78
Routing and Control Board Components | 79
The MX10008 Routing and Control Board (RCB) is responsible for system management in an MX10008
router (see Figure 37 on page 78). The chassis can run with one or two RCBs. The base configuration ships
with one RCB while a redundant configuration ships with two RCBs. When two RCBs are installed, one
functions as the master and the second as a backup. If the master RCB is removed, the backup becomes
the master if graceful Routing Engine switchover (GRES) is configured.
MX10008 supports the following Routing Engines:
•
JNP10K-RE1
•
JNP10K-RE1-LT
•
JNP10K-RE1-128G
77
To Next Page
Loading...
Need help?
General
