MX10008 Power Planning
IN THIS SECTION
Power Requirements for an MX10008 Router | 100
JNP10K-PWR-AC Power Specifications | 105
JNP10K-PWR-AC2 Power Specifications | 106
MX10000 Power Cables Specifications | 107
JNP10K-PWR-DC Power Specifications | 115
JNP10K-PWR-DC2 Power Specifications | 116
MX10008 Grounding Cable and Lug Specifications | 117
MX10008 power specifications and requirements are described in the following topics. Use the information
to calculate the power consumption for the MX10008 and plan your configuration’s power requirements.
Power Requirements for an MX10008 Router
Use the information in this topic to calculate power requirements of your MX10008 configuration and
the number of power supplies required for different MX10008 router configurations.
NOTE: The calculations in this topic represent the maximum power requirements that you need
to budget for your MX10008 router configuration. The actual power consumption of your router
will be less than the calculated results shown here and will vary based on the hardware and software
configuration of your router, the amount of traffic passing through the line cards, and environmental
variables such as room temperature.
Before you begin these calculations:
•
Ensure you understand the different router configurations. See “MX10008 Components and
Configurations” on page 31.
•
Ensure that you know the power requirements of different router components. See Power Requirements
for MX10008 Components.
100
To Next Page
Loading...
Need help?
General
