Admin page
Through the Admin page, you can change the instrument password and the instrument time.
Change the password
To change the password for the web interface:
1. In the web interface, from the left navigation, click Admin. A login page is displayed.
2. Enter the current password in the Password box. (The default is "admin".)
3. Click Login. The Administration page is displayed.
4. In the Current Password box, enter the current password.
5. In the New Password box, enter the new password.
6. In the Confirm New Password box, enter the new password again.
7. Click Submit. The new password takes effect immediately.
Change the instrument date and time
To change the date and time of the instrument:
1. In the web interface, from the left navigation, click Admin. A login page is displayed.
2. Enter the current password in the Password box (the default is "admin").
3. Click Login. The Administration page is displayed.
4. Enter the Year.
5. Select the Month, Day, Hour, Minutes and Seconds from the lists.
6. Click Submit. The new time and date information takes effect immediately.
LXI page
The Series 3700A is a LXI Class B and C instrument. The LXI page is a read-only page that displays
the LXI information about the instrument.
IP Config
The IP Config allows you to review and change the LAN connection information.
See Configure channels from the web interface (on page 3-39) for more information.
Log page
The event log records all LAN[0-7] triggers generated and received and can be viewed over any
command interface, including the web interface. The following figure shows the view of the LAN[0-7]
event log from the embedded web interface.
Up to 32 LAN[0-7] events are logged and shown on this page. The event log is circular and rolls over
after 32 events are captured. The LAN[0-7] events correspond to the lan.trigger[1-8] subsystem.
To Next Page
Loading...
Need help?
General
