Keithley 3700 Series User Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-108 3700AS-901-01 Rev. D/June 2018
Example
comm.lan.enable = true
comm.lan.telnet.enable = false
Enable all LAN communication with
instrument, then disable only Telnet over the
LAN.
Also see
comm.lan.enable (on page 11-106)
comm.lan.rawsockets.enable (on page 11-107)
comm.lan.vxi11.enable (on page 11-108)
comm.lan.web.enable (on page 11-109)
lan.status.port.telnet (on page 11-271)
Telnet connection (on page A-15)
comm.lan.vxi11.enable
This attribute describes whether or not communication using a VXI-11 connection is enabled.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile
memory
true (enabled)
Usage
state = comm.lan.vxi11.enable
comm.lan.vxi11.enable = state
state
true: Enabled
false: Disabled
Details
This performs the same function as the MENU > LAN > ENABLE > VXI11 option that is available
through the front panel of the instrument.
Example
comm.lan.enable = true
comm.lan.vxi11.enable = false
Enable all LAN communication with
instrument, then disable only VXI-11 over the
LAN.
Also see
comm.lan.enable (on page 11-106)
comm.lan.rawsockets.enable (on page 11-107)
comm.lan.telnet.enable (on page 11-107)
comm.lan.web.enable (on page 11-109)
lan.status.port.vxi11 (on page 11-271)
VXI-11 connection (on page A-15)

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English