Keithley 3700 Series User Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-417
Details
The trigger.timer[N].reset() function resets the following attributes to their factory defaults:
▪ trigger.timer[N].count
▪ trigger.timer[N].delay
▪ trigger.timer[N].delaylist
▪ trigger.timer[N].passthrough
▪ trigger.timer[N].stimulus
It also clears trigger.timer[N].overrun.
Example
trigger.timer[1].reset()
Resets the attributes associated with timer 1 back
to factory default values.
Also see
trigger.timer[N].count (on page 11-412)
trigger.timer[N].delay (on page 11-413)
trigger.timer[N].delaylist (on page 11-414)
trigger.timer[N].overrun (on page 11-415)
trigger.timer[N].passthrough (on page 11-416)
trigger.timer[N].stimulus (on page 11-417)
trigger.timer[N].stimulus
This attribute describes the event that starts the trigger timer.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Reset
Recall setup
Trigger timer N reset
Create configuration script
Save setup
0
Usage
eventID = trigger.timer[N].stimulus
trigger.timer[N].stimulus = eventID
eventID
The event that triggers the timer delay
N
Trigger timer number (1 to 4)

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English