Keithley 3700 Series User Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-330 3700AS-901-01 Rev. D/June 2018
Also see
scan.trigger.arm.clear() (on page 11-327)
scan.trigger.arm.set() (on page 11-328)
Trigger model (on page 5-24)
Scanning and triggering (on page 5-23)
scan.trigger.channel.clear()
This function clears the channel event detector.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
scan.trigger.channel.clear()
Details
This function clears the channel event detector of the trigger model (sets it to the undetected state).
Example
scan.trigger.channel.clear()
Clears the channel event detector.
Also see
scan.trigger.channel.set() (on page 11-330)
scan.trigger.channel.stimulus (on page 11-331)
Trigger model (on page 5-24)
Scanning and triggering (on page 5-23)
scan.trigger.channel.set()
This function sets the channel event detector to the detected state.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
scan.trigger.channel.set()
Details
This function sets the channel event detector of the trigger model to the detected state.
Example
scan.trigger.channel.set()
Sets the channel event detector of the trigger
model to the detected state.
Also see
scan.trigger.channel.clear() (on page 11-330)
scan.trigger.channel.stimulus (on page 11-331)
Trigger model (on page 5-24)
Scanning and triggering (on page 5-23)

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English