Keithley 3700 Series User Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-260 3700AS-901-01 Rev. D/June 2018
lan.config.dns.dynamic
Enables or disables the dynamic DNS registration.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.ENABLE)
Usage
state = lan.config.dns.dynamic
lan.config.dns.dynamic = state
state
The dynamic DNS registration state. It may be one of the following values:
▪ 1 or lan.ENABLE: Enabled
▪ 0 or lan.DISABLE: Disabled
Details
Dynamic DNS registration works with DHCP to register the host name with the DNS server. The host
name is specified in the lan.config.dns.hostname attribute.
Example
print(lan.config.dns.dynamic)
Outputs the dynamic registration state.
If dynamic DNS registration is enabled, the response is:
1.00000e+00
Also see
lan.config.dns.hostname (on page 11-260)
lan.restoredefaults() (on page 11-265)
lan.config.dns.hostname
This attribute defines the dynamic DNS host name.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile memory
Instrument specific
(see Details)
Usage
hostName = lan.config.dns.hostname
lan.config.dns.hostname = hostName
hostName
The host name to use for dynamic DNS registration; the host name must:
▪ be a string of 15 characters or less
▪ start with a letter
▪ end with a letter or digit
▪ contain only letters, digits, and hyphens

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English