Menu overview
The following topics describe how to work with the front panel menus.
Menu navigation
To navigate through the menus and submenus, the Series 3700A must not be in edit mode (the EDIT
indicator is not illuminated).
Selecting menu items
To navigate the Main and Configuration menus, use the editing keys as follows:
• Press either CURSOR arrow key to highlight an option.
• Rotate the navigation wheel (clockwise or counter-clockwise) to highlight an option.
• Press the ENTER key (or the navigation wheel ) to select an option.
• Use the EXIT (LOCAL) key to cancel changes or to return to the previous menu or display.
For quick menu navigation, turn the navigation wheel to highlight an option and then press the
navigation wheel to select the highlighted option.
Setting a value
You can adjust values on the front panel using the navigation wheel:
1. Use the CURSOR arrow keys to move the cursor to the value that you want to edit.
2. Press the navigation wheel or the ENTER key to enter edit mode. The EDIT indicator is
illuminated.
3. Rotate the navigation wheel to set the appropriate value.
4. Press the ENTER key to select the value or press the EXIT (LOCAL) key to cancel the change.
5. To return to the main menu, press the EXIT (LOCAL) key.
Menu trees
You can configure instrument operation through the menus that are accessed from the front panel.
To Next Page
Loading...
Need help?
General
