Keithley 3700 Series User Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-266 3700AS-901-01 Rev. D/June 2018
Details
The settings that are restored are shown in the following table.
Settings that are restored to default
Attribute
Default setting
lan.config.dns.address[N]
"0.0.0.0"
lan.config.dns.domain
""
lan.config.dns.dynamic
lan.ENABLE
lan.config.dns.hostname
"K-<model number>-<serial number>"
lan.config.dns.verify
lan.ENABLE
lan.config.gateway
"0.0.0.0"
lan.config.ipaddress
"0.0.0.0"
lan.config.method
lan.AUTO
lan.config.subnetmask
"255.255.255.0"
lan.lxidomain
0
localnode.password
"admin"
The lan.restoredefaults() function does not reset the LAN password. The
localnode.password attribute controls the web password, which can be reset separately.
This command is run when lan.reset() is sent.
Example
lan.restoredefaults()
Restores the LAN defaults.
Also see
lan.reset() (on page 11-265)
localnode.password (on page 11-286)
lan.status.dns.address[N]
This attribute contains the DNS server IP addresses.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
dnsAddress = lan.status.dns.address[N]
dnsAddress
DNS server IP address
N
Entry index (1, 2, or 3)

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English