Keithley 3700 Series User Manual

Section 5: Switching and scanning Series 3700A System Switch/Multimeter Reference Manual
5-30 3700AS-901-01 Rev. D/June 2018
Include multiple channels in a single scan step
Through the remote control interface, you can use scan.addimagestep to combine a list of
channels into a scan step.
The following example creates five scan steps with the indicated channels.
scan.create()
scan.addimagestep("1006,1007")
scan.addimagestep("1010,1011")
scan.addimagestep("1012,1013")
scan.addimagestep("1014,1015")
Remote interface scanning
Scan and trigger commands
The following list contains commands associated with triggers and bus operation scanning:
• lan.trigger[N].clear() (on page 11-273)
• trigger.blender[N].stimulus[M] (on page 11-409)
• trigger.blender[N].wait() (on page 11-410)
• trigger.timer[N].clear() (on page 11-412)
• trigger.timer[N].stimulus (on page 11-417)
• digio.trigger[N].clear() (on page 11-117)
• digio.trigger[N].pulsewidth (on page 11-120)
• digio.trigger[N].stimulus (on page 11-122)
• digio.trigger[N].wait() (on page 11-124)
• lan.trigger[N].assert() (on page 11-273)
• lan.trigger[N].clear() (on page 11-273)
• lan.trigger[N].overrun (on page 11-278)
• lan.trigger[N].stimulus (on page 11-280)
• lan.trigger[N].wait() (on page 11-282)
• scan.add() (on page 11-309)
• scan.background() (on page 11-313)
• scan.bypass (on page 11-314)
• scan.create() (on page 11-315)
• scan.execute() (on page 11-317)
• scan.list() (on page 11-318)
• scan.measurecount (on page 11-320)
• scan.mode (on page 11-321)
• scan.reset() (on page 11-324)
• scan.scancount (on page 11-325)
• scan.state() (on page 11-326)
• scan.stepcount (on page 11-327)
• scan.trigger.arm.clear() (on page 11-327)
• scan.trigger.arm.set() (on page 11-328)
• scan.trigger.arm.stimulus (on page 11-328)

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English