Keithley 3700 Series User Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-3
The following errors can occur because of invalid channel list syntax or specification.
Error Message
Description
invalid specified channel
The channel is specified with the correct syntax, but does not
exist on the card.
invalid character in channel list
The channel list contains an invalid character or syntax
sequence.
invalid slot in channel list
The slot specified in the channel list is empty.
invalid channel type in channel
list
The channel is specified with the correct syntax, but the
channel type is not supported by the specified remote
command.
no valid channels in channel list
After processing, no valid channels remain in the command
to act upon.
invalid label or pattern name
A string was found in the channel list that does not specify
any known label or pattern name.
no patterns accepted
A pattern was specified for a remote command that does not
support patterns as input.
no multiple channels accepted
Multiple channels were specified for a remote command that
acts only on a single channel.
no range specifier accepted
A range was specified for a remote command that does not
support a range as input.
no slot specifier accepted
An entire slot was specified using slotX (for example,
slot1) for a remote command that does not support slotX
as input.
no all slots specifier accepted
All slots were specified using allslots for a remote
command that does not support allslots as input.
no labels accepted
A label was specified for a remote command that does not
support labels as input.
no paired channels accepted
A channel was specified for a remote command that does not
act on paired channels.
no single channels accepted
A single channel was specified for a remote command that
only supports acting on groups of channels.
no multiple specifiers accepted
Multiple descriptions were specified for a remote command
that does not support multiple descriptions in a list.
channels all must be of same type
The provided channel list contains channels of various
channel types, but the remote command supports only
channel lists that contain a single, consistent channel type.
forbidden channel
The channel specified is forbidden to be closed.

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English