Keithley 3700 Series User Manual

Section 3: Instrument description Series 3700A System Switch/Multimeter Reference Manual
3-10 3700AS-901-01 Rev. D/June 2018
The following table contains descriptions of the main menu options and cross-references to related
information. To access a menu option, press the MENU key, turn the navigation wheel to move the
cursor to select an item, and press the navigation wheel .
Main menu options
Menu selection
Description
For more information, see:
SCRIPT
Saves and recalls user's scripts
Manage scripts (on page 10-3)
- CREATE-CONFIG
Automatically generates a user script that is saved to a
script with a name that you define
Create a configuration script (on page 3-
35)
- LOAD
Loads scripts into nonvolatile memory
- SAVE
Saves scripts
SETUP
Saves and recalls user and factory setup options
Saved setups (on page 3-30)
- SAVE
Saves user setup options
- RECALL
Recalls user setup options
- POWERON
Sets the configuration used during startup
- RESET
Resets the instrument, restores factory default settings,
removes channel patterns, reading buffers, and DMM
configurations, and opens channels and backplane relays
GPIB
Configures the GPIB interface options
Remote communications interfaces (on
page 2-6)
- ADDRESS
Configures the address for the GPIB interface
- ENABLE
Enables and disables the GPIB interface
LAN
Configures the local area network (LAN)
LAN concepts and settings (on page A-1)
- STATUS
Displays LAN connection status
- CONFIG
Configures the LAN IP address and gateway
- APPLY
Applies changes made using the LAN CONFIG menu
- RESET
Restores the default settings
- ENABLE
Enables and disables the LAN interface
TSPLINK*
Configures the instrument in a TSP-Link
®
network
TSP-Link system expansion interface (on
page 10-53, on page 10-52)
- NODE
Selects the instrument node identifier
- RESET
Resets the TSP-Link network
UPGRADE
Upgrades the firmware from a USB flash drive
Upgrading the firmware (on page 7-5)
EMULATION
Sets the model number that is reported when the model
number is queried
- 3706A
Report the model as a 3706A
- 3706
Report the model as a 3706
CHANNEL
Select the type of close and open duration
Working with channels (on page 5-13)
- RULE
Select the connection rule when opening and closing
channels
- SEQUENTIAL
Determines if channels are closed sequentially
DISPLAY
Accesses display functions
Front panel tests (on page 7-3)
- TEST
Runs the display tests
DIGIO**
Controls digital outputs
Digital I/O (on page 2-28)
- DIGIO-OUTPUT
Selects the digital I/O values
- WRITE-PROTECT
Write-protects specific digital I/O lines
BEEPER
Controls the key beeps
General operation
- KEYCLICK
Enable or disable key clicks
- BEEPER
Enable or disable the beeper and key clicks
UNIT-INFO
Displays the system information
General operation
- FIRMWARE
Displays the version of firmware installed
- SERIAL#
Displays the serial number of the instrument
- MEMORY-USAGE
Displays memory usage in percentage
- CAL
Displays the last calibration date and number of times the
instrument has been adjusted
* TSPLINK is not available on the Models 2604A, 2614A, and 2634A.
** DIGIO is not available on the Models 2604A, 2614A, and 2634A.

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English