Keithley 3700 Series User Manual

Index Series 3700A System Switch/Multimeter Reference Manual
2 3700AS-901-01 Rev. D/June 2018
overview • 6-1
programming examples • 6-9
ptpseconds • 11-29
reading attributes • 6-10
reading buffer • 6-8
read-only attributes • 6-9
recall attributes • 6-10
relativetimestamps • 11-32
remote operation • 6-6
status • 6-13
storage control attributes • 6-9
times • 11-37
units • 11-39
bus operation
scanning • 5-31
C
cable leakage • 4-21
calculated measurement open voltage • 8-16, 8-20
calculating
AC characteristics accuracy • 8-22
DC characteristics accuracy • 8-22
open voltage • 8-23
reading limits • B-4
calculations
accuracy • 8-22
math • 4-51
calibration • 11-40, 11-41, 11-43, 11-44, 11-45, 11-
47, 11-48, B-20, B-23
considerations • B-22
cycle • B-22
DC current (adjustment) • B-27
saving • 11-44, B-32
channel • 11-40, 11-41
break before make • 11-51
close and open • 5-4, 11-49, 11-51
commands, using • 11-2
designations • 5-3
display • 6-5
existing scan • 5-28
forbidden to close • 11-49, 11-94
list parameter • 5-11
make before break • 11-51
pattern attributes • 5-20
patterns • 5-20
range • 4-58, 5-13
rule (channel) • 5-13
channel commands
channel.clearforbidden() • 11-49
channel.close() • 11-49
channel.connectrule • 11-51
channel.connectsequential • 11-53
channel.createspecifier() • 11-54
channel.exclusiveclose() • 11-55
channel.exclusiveslotclose() • 11-57
channel.getclose() • 11-61
channel.getcount() • 11-62
channel.getdelay() • 11-64
channel.getforbidden() • 11-65
channel.getimage() • 11-66
channel.getlabel() • 11-68
channel.getstate() • 11-75
channel.gettype() • 11-78
channel.open() • 11-79
channel.pattern.catalog() • 11-81
channel.pattern.delete() • 11-82
channel.pattern.getimage() • 11-82
channel.pattern.setimage() • 11-83
channel.pattern.snapshot() • 11-85
channel.reset() • 11-89
channel.setdelay() • 11-93
channel.setforbidden() • 11-94
channel.setlabel() • 11-95
channel list queries • 5-11
channel patterns • 5-20, 5-21
clear • 11-132, 11-462
clearing
readings • 6-4
close
close channel operations • 5-4, 11-49, 11-55, 11-
57, 11-61, 11-79
Comm attributes
comm • 11-111
comm.lan.rawsockets.enable • 11-111
comm.lan.telnet.enable • 11-113
comm.lan.vxi11.enable • 11-113
comm.lan.web.enable • 11-114
command • 9-1
device control • 10-68
ICL commands • 5-31
programming notes • 11-1
queries • 9-2
reference • 11-1
conditional branching • 10-22
CONFIG CHAN key • 3-18
configuration
configuration • 4-56
configuration (front panel) • 6-6
createconfigscript() • 11-115
script • See createconfigscript()
connecting multiple instruments
TSP-Link • 10-54
connection
connect rule (channel) • 11-51
line power • B-2
methods • 5-13
warning • 3-35
considerations
calibration • B-22
dry circuit ohms measurement • 4-67

Keithley 3700 Series Specifications

General

Brand	Keithley
Model	3700 Series
Category	Multimeter
Language	English