To Next Page

To Previous Page

Calibration 19-13

7. Set the calibration due date to the desired value, and then press ENTER. Press ENTER

again to conﬁrm the date.

8. Once the calibration dates are entered, calibration is complete, and the following mes-

sage will be displayed:

CALIBRATION COMPLETE

Press ENTER to conﬁrm; EXIT to abort

9. Press ENTER to save the calibration data (or press EXIT to abort without saving cali-

bration data.) The following message will be displayed:

CALIBRATION SUCCESS

Press ENTER or EXIT to continue.

10. Press ENTER or EXIT to complete process.

Step 5: Lock out calibration

1. From normal display, press MENU.

2. Select CAL, and then press ENTER. The Model 6430 will display the following:

CALIBRATION

UNLOCK EXECUTE VIEW-DATES

SAVE LOCK CHANGE-PASSWORD

3. Select LOCK, and then press ENTER to lock out calibration.

100mA +100.00mA

+000.00mA

-100.00mA

+000.00mA

___________ mA

Use EDIT and RANGE keys to select source range.

Multimeter current reading used in corresponding calibration step. See procedure.

Table 19-4 (cont.)

Mainframe current calibration summary

Source range

Source current Multimeter current reading

▲

Keithley 6430 User Manual

Other manuals for Keithley 6430