Revision:1.0(2023-01-12)
107
The barcode is comprised of the patient ID, other IDs, patient name, DOB, and other
information.
Setup items are described as follows:
Item Description
Barcode
example
Enter a barcode and the system automatically separates the barcode
into the list in the lower part based on separators, which set the start
position and end position of different information items.
Parameters
– After an example barcode is entered, you can modify the patient ID,
other Ids, patient name, DOB (including the year, month, and day),
age, gender, and other fields in the Content column.
– Ignored item is used to add a line of ignored item below the
selected parameter to hide unimportant information fields in the
barcode.
– Set the start and end positions of each item by using separators.
After entering a barcode example, select the barcode field
separators. The separator drop-down list displays only the
separators that have been entered in the barcode example.
– Delete: To delete only information in the Content column of the
selected item.
– Restore default: Restore the default values of parameters.
– Age unit: Select the corresponding age unit, which can be year,
month, or day.
– Enter the custom gender symbol behind the male and female dialog
boxes, for example, male (M) and female (F).
Define the units of the DOB (year, month, and day) on the right. If
the DOB is pure digits, the system will automatically calculates
the patient's age based on the DOB provided by the patient.
Age unit
Select the corresponding age unit.
Male/Female
Enter the custom gender symbol.
Default item If no default item is set, the scanned information is directly input after 2D
and 1D match failures. If a default item is set, the system considers
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
