Revision:1.0(2023-01-12)
114
Item Description
• Manage certificates, including the importing and
removing certificates.
Set the server Device Name Server name (name of the device supporting DICOM
services).
IP Address IP address of the server.
Ping Determines whether the connection is successful.
Server List Display the existing DICOM servers.
Setting DICOM
Service
Set various DICOM services.
Log Level
Select the log level.
Setting the
DICOM Policy
Configure the DICOM policy.
/ Log Level This item is provided only for engineers. Log collection
levels can be set for the DICOM server.
Collection Click the collect button to capture data.
Add Servers
Perform the following steps:
1. Input the device name and IP address of the server in the server presetting box, and click Ping
to confirm the connection.
2. Click Add to add the server to the alternative server list. The name and IP address of the
server will be displayed in the server list.
Deleting Servers
Select a server in the server list, and click Delete to delete the server from the server list.
Setting the DICOM Policy
• The DICOM policy is configured and applied only for professionals with DICOM
international standard knowledge.
• Configuration staff should ensure the legitimacy of the policy.
Perform the following steps:
1. Click Set DICOM policy to enter the policy configuration screen.
2. Editing the policy:
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
