6-16 Instruments and warning lamps
3.6 Maintenance information
If you select this mode, the multi-information display
indicates the running distance and the number of
months since the distance was last reset after
replacing oils, fluids, or filter elements according to
your selection of screen.
•
Selection of maintenance information screens
1. Press the MODE switch to select the mainte-
nance information mode .
2. Press the SELECT switch . Each time you
press the switch, the screen changes to the one
for a new replacement item in the following
sequence, beginning with the previously dis-
played screen:
ENGINE OIL
→
OIL FILTER (engine oil filter)
→
FUEL FILTER
→
BRAKE FLUID
→
AIR FIL-
TER
→
T/M OIL (transmission oil and clutch
control fluid)
→
HUB GREASE (wheel hub bear-
ing grease)
→
DIFF OIL (differential oil)
→
P/S
OIL (power steering oil)
→
ENG COOLANT
(engine coolant)
Z21556
Z21557
FE_FG.book Page 16 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
