6-24 Instruments and warning lamps
2.3 Engine system warning
• Red warning
If an engine system warning is shown, have the
vehicle inspected by the nearest authorized dealer.
• Amber warning
If an engine system warning is shown, have the
vehicle inspected by the nearest authorized dealer.
2.4 Transmission oil temperature warning
This warning is displayed when the clutch control
fluid temperature is too high.
If this indication appears while driving, stop the
vehicle in a safe place and do the following:
1. Firmly apply the parking brake and move the
gearshift lever to “P”.
2. Run the engine at a speed slightly higher than
the idling speed. If the indication goes out, you
may continue driving. If the indication remains
displayed, contact your nearest authorized
dealer.
2.5 Transmission control warning
• Red warning
The red transmission control warning is displayed
when the DUONIC
TM
system is faulty.
If this indication appears while driving, stop the
vehicle in a safe place and do the following:
1. Firmly apply the parking brake and move the
gearshift lever to “P”.
2. Turn the starter switch to “ACC” or “LOCK”.
3. Turn the starter switch to “ON”.
4. If the indication remains displayed, avoid con-
tinuing to drive and contact your nearest autho-
rized dealer.
• Amber warning
The amber transmission control warning is dis-
played when the DUONIC
TM
system is faulty (but
automatic or manual gear shifting is possible).
• If driving in the automatic shift mode is possible,
you may continue to drive but must have the
vehicle inspected by an authorized dealer as
soon as possible.
• If no automatic gearshift takes place when driv-
ing in the automatic gearshift mode, stop the
vehicle in a safe place and do the following:
1. Firmly apply the parking brake and move the
gearshift lever to “P”.
2. Turn the starter switch to “ACC” or “LOCK”.
Z21711
Z21712
Z21713
FE_FG.book Page 24 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
