5-38 Switches and controls
Cruise control indicator lamp
If the cruise control is activated, this lamp illumi-
nates during driving.
Cancel switch
Press this switch to stop cruise control opera-
tion.
2 To set a desired speed
1. If your vehicle is equipped with an exhaust
brake, check that the exhaust brake switch is in
the “OFF” position. If the switch is in the “ON”
position, place it in the “OFF” position.
Press the ON side of the cruise control main
switch. The lamp inside the switch will illumi-
nate.
2. Depress the accelerator pedal until the desired
speed is reached.
Z21521
ON
Z21524
FE_FG.book Page 38 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
