12-94 Simple inspection and service
3.8 Removing floor mat for cleaning
1. Remove the accelerator stopper by removing
its screws .
2. Install the accelerator stopper being careful not
to let the cut edge of the floor mat become
caught under the stopper.
CAUTION
After cleaning the floor mat, dry the felt backing
before putting the mat back on the floor. When
fitting the floor mat back in the vehicle, make
sure it does not interfere with the accelerator
pedal and other moving parts. If the floor mat is
interfering with the accelerator pedal, the pedal
cannot return to the fully free position even
when it is released, which could lead to an acci-
dent.
If the front of the intercooler is heavily clogged with
dust or mud, the engine performance may be
affected. Clean it from time to time by using a soft
brush or something also appropriate.
CAUTION
The intercooler could be damaged if a bristle
brush or an object with a sharp point is used for
its cleaning.
Intercooler – cleaning
Z21746
Z21121
FE_FG.book Page 94 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
