8-6 4WD operation <FG models>
When you select the 4WD mode to drive on off-road
terrain (sandy or muddy ground) or snow-laden or
frozen roads, take sufficient care to avoid inappro-
priate operation.
1 Driving on snow-covered or frozen
roads
Select the 4WD mode if necessary for the snow or
road surface conditions. Start out slowly.
Tire chains cannot be used on both front and rear
wheels. You are advised to use snow or winter tires.
2 Driving on sandy or muddy ground
•
Select the 4WD mode if you find it appropriate to
do so after checking sand or mud conditions.
Start out slowly. Drive at low speeds, keeping
the speed as constant as possible.
• Avoid quick acceleration, sudden braking and
sharp turn as they can cause the vehicle to
become stuck in the sand or mud, making it
impossible to free the vehicle by yourself.
• Muddy conditions are generally difficult to judge
and there is danger of becoming stuck in deep
mud. To prevent this, drive as slowly as possible
and, if necessary, get out of the vehicle and
check the conditions.
3 Climbing steep hills
Select the 4WD mode to make full use of engine
torque. Choose the path that has the least stones,
sand and bumps. At both the start and end of a
climb, moderate slopes are preferable.
Advice on use of the 4WD mode
FE_FG.book Page 6 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
