10-25
4.3 Basic operations
• Fast forwarding/fast reversing
• Press the “ ” or “ ” tuning button for as
long as necessary. Rapid disc reading con-
tinues forward or backward until the button is
released.
: Press this button for fast forwarding.
: Press this button for fast reversing.
• Playback starts as soon as you release the
button.
• Track searching
Press the “ ” or “ ” tuning button until the
display indicates the desired track number.
: Press this button for a higher track number.
: Press this button for a lower track number.
• Folder searching (MP3/WMA file CDs)
Press the “5” or “6” preset button as many times
as necessary to make the desired file title
appear on the display.
5: Press this button once for the next file.
6: Press this button once for the preceding file.
The display will indicate the title of the folder and
then the title of the first file.
• Pausing the playback
The currently playing track is paused if you
press the “CD” button. Press the button another
time to cancel the pause mode.
NOTE:
• Track searching is possible within the same
folder for an MP3/WMA file CD.
• While an MP3/WMA file is being fast-forwarded
or fast-reversed, the sound will be reproduced
only intermittently.
4.4 Repeating the same track
• Press the “2” preset button.
• The display will show “RPT”. (Playback of the
next track will be repeated if you press the but-
ton between two tracks.)
• Pressing the same button again cancels the
repeated playback mode.
Z21843
Z21083
Z21471
FE_FG.book Page 25 Tuesday, February 8, 2011 4:00 PM