9-7
1.4 Air conditioner switch
Pressing the air conditioner switch activates the air
conditioner, which has cooling and dehumidifying
functions. The indicator lamp in the switch comes
on at this time. Pressing the air conditioner switch
once more stops the air conditioner.
NOTE:
• If the air conditioner switch is pressed with the
starter switch at “OFF”, the air conditioner will
not start until the starter switch is turned to “ON”.
• If the air conditioner switch is pressed when the
fan speed dial is turned to the “OFF” position,
the air conditioner will not start until the fan
speed dial is turned to an operating position.
1.5 Mode selector dial
Use the mode selector dial to select outlets as
desired.
• For airflow toward the upper body
Place the mode selector dial in the position.
• For airflow toward the upper body and
toward the feet
Place the mode selector dial in the position.
• For airflow toward the feet
Place the mode selector dial in the position.
Z21040
Z21367
Z21368
Z21369
FE_FG.book Page 7 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
