Mitsubishi FUSO FE 2012 User Manual

15-4 Maintenance schedule
POWER TRAIN
Propeller shaft
flange torque and
universal joint loose-
ness
•I
Every 30,000 km/
18,000 miles or
12 months
Check flange yoke bolts for
looseness and universal joint
for play.
–
Propeller shaft cen-
ter bearing
••
Every 60,000 km/
36,000 miles or
24 months
Check center bearing if trace
of grease flowing out is evi-
dent.
Check center bearing for
wear, damage and play.
–
FRONT AND REAR AXLE
Wheel hub
bearing
••
Every 60,000 km/
36,000 miles or
12 months
Check wheel hub bearing for
play.
–
Wheel hub bearing
hub seals replace-
ment
••
Every 60,000 km/
36,000 miles or
12 months
When wheel hub bearing
grease is replaced, also
replace the wheel hub bearing
hub seals.
–
Wheel and tire
I•
Every 30,000 km/
18,000 miles or
12 months
Check disc wheel for corro-
sion, deformation and cracks.
12-66
I•
Every 30,000 km/
18,000 miles or
12 months
Check tire tread and side wall
for cracks and damage.
Measure tire tread groove
depth to make sure it is deep
enough.
Check tire tread for uneven
wear, stepped wear and other
abnormal wear.
A••••••
Measure inflation pressure
with tire gauge.
••
Every 30,000 km/
18,000 miles or
12 months
Rotate all tires. 12-78
Tie rod ball joint dust
boots
••
Every 30,000 km/
18,000 miles or
12 months
Check the ball joint dust boots
for cracks and wear.
–
Wheel nuts loose-
ness
•I
Every 30,000 km/
18,000 miles or
12 months
Check wheel nuts for loose-
ness.
Check at the first 50 to 100
km/30 to 60 miles after chang-
ing a wheel.
12-76
Item
Time of inspection and maintenance
Working procedures
Ref.
page
Pre-operational checks 1st maintenance at 4,000 km/2,500 miles
Inspection interval
Every 10,000 km/ 6,000 miles Every 20,000 km/ 12,000 miles Every 30,000 km/ 18,000 miles Every 40,000 km/ 24,000 miles Every 50,000 km/ 30,000 miles
FE_FG.book Page 4 Tuesday, February 8, 2011 4:00 PM

Mitsubishi FUSO FE 2012 Specifications

General

Brand	Mitsubishi
Model	FUSO FE 2012
Category	Automobile
Language	English