10-22 Interior equipment and accessories
• Automatic programming
1. Select the desired band from FM1, FM2, AM1
and AM2 using the “AM/FM” button.
2. Give the “PS/AS” button a long press.
The radio will start automatic tuning. Each time
the radio tunes to a station with good reception,
the station is automatically programmed to a
preset button. The lowest frequency station is
programmed to button “1” and the highest fre-
quency station is programmed to button “6”.
NOTE:
If the number of stations with good enough recep-
tion for automatic tuning is smaller than the number
of preset buttons, the remaining buttons may main-
tain the original memory.
3. After completing the automatic programming,
the radio will tune to all the memorized stations
one after another, receiving the broadcast from
each station for 10 seconds. If you press the
“PS/AS” button another time, the radio stays
tuned to the station being received at that time.
3.5 Automatic tuning using the “SCAN” button
• Press the “SCAN” button. The radio will auto-
matically tune to a station of a higher frequency.
• The radio receives the broadcast from the sta-
tion for 10 seconds. After the 10-second period,
the radio will start the next scan tuning.
• To stop the scan tuning, press any other button.
Z21851
Z21765
FE_FG.book Page 22 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
