6-22 Instruments and warning lamps
2.1 Red and amber indications
Indication Warning/indicator Condition for lighting/flashing
Ref.
page
Engine system warning
Engine power is being automatically
restricted.
6-24
Engine system warning Engine must be inspected. 6-24
Transmission oil temperature
warning
Clutch control fluid temperature is too
high.
6-24
Transmission control warning DUONIC
TM
system is faulty. 6-24
Transmission control warning
DUONIC
TM
system is faulty (but auto-
matic or manual gear shifting is possi-
ble).
6-24
Cab tilt warning
Cab tilt lock is not completely
engaged. (A buzzer will sound at a
vehicle speed of 5 km/h (3 mph) or
higher.)
12-10
SAM warning
Failure has occurred in electric control
system of SAM.
6-25
SAM warning
Failure has occurred in electric control
system of SAM (a failure that requires
inspection of exterior lamps).
6-25
Overloaded DPF warning DPF contains too much PM. 5-51
Meter cluster warning
Electrical system of meter cluster is
faulty.
6-26
Engine oil level warning
The amount of fuel mixed with engine
oil has exceeded the upper limit.
(Some fuel is intentionally mixed with
engine oil to burn PM in DPF.)
6-26
Fuel filter warning Water in fuel filter has increased. 12-50
(red)
(amber)
(red)
(red)
(amber)
(red)
(red)
(amber)
(amber)
(amber)
(amber)
(amber)
FE_FG.book Page 22 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
