6-18 Instruments and warning lamps
• Each time you press the MODE switch, the
period decreases by 1 month.
• A long press on the SELECT or MODE switch
increases or decreases the period by 2 months,
respectively.
• If the replacement interval is controlled by the
distance (not by the period of time), leave the
period space blank (“-- month”).
7. Press the SET/RES switch to return to the initial
display screen.
8. In the initial display screen, give a long press on
the SET/RES switch until “0 mile” and “0
months” are indicated.
• Maintenance alarm indication
• For each item for which you have set the
replacement interval, an alarm is indicated at
621.5 miles (1,000 km) or 1 month before the
set distance or period of time is reached.
If this condition is met for an item, an alarm will
be indicated for the item every time the starter
switch is turned to “ON”. The alarm indication
goes out as soon as the parking brake is
released. If there are multiple alarms to indicate,
they are indicated one after another, each being
indicated for 3 seconds.
• If a periodic replacement item is used continu-
ously even after the set distance or period is
reached, the maintenance information symbol
will turn to amber .
Z21559
Z21560
FE_FG.book Page 18 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
