9-11
1 Using the air conditioner automatically
1. Set the air volume adjustment dial to “AUTO”.
2. Set the desired temperature using the tempera-
ture adjustment dial.
You can adjust the set temperature to a value
between 65°F and 85°F (18°C and 29°C).
3. Set the air outlet selector dial to “AUTO”.
The air outlet (excluding and ), air vol-
ume, “ON” or “OFF” status of the air conditioner,
and air selector are adjusted automatically.
4. To stop operation, set the air volume adjustment
dial to OFF.
NOTE:
• Do not place objects on the solar radiation sen-
sor or cover it because this will prevent the air
conditioning operation from taking account of
solar radiation.
•
During “AUTO” operation, if you operate the air
volume adjustment dial, the air outlet selector
dial, or the air selector switch, the operated func-
tion will take priority. Functions other than the
operated one will be controlled automatically.
• The automatic control of the air selector does
not work when the air conditioner is turned off.
Z21055
Z21373
Z21057
Z21374
FE_FG.book Page 11 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
