Bluetooth Configuration Setting
The MC32N0 supports both the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack. Only one
Bluetooth stack can be used at a time. By default, the Microsoft Bluetooth stack is enabled. A registry key on the
MC32N0 can be modified to disable the Microsoft stack and enable the StoneStreet One stack.
Registry Setting
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\Software\SymbolBluetooth]
Edit the following key:
“SSStack”=dword:1
where:
•
0 = enable Microsoft stack and disable StoneStreet One stack (default)
•
1 = enable StoneStreet One stack and disable Microsoft stack
After setting the registry key, warm boot the MC32N0.
Sample Applications and StartUpCtl Configuration
The MC32N0 with Windows CE 7.0 contains a set of sample applications that can be installed on the device. As part
of the installation, an application called StartUpCtl is also installed.
On the desktop, double-tap the Install Samples icon.
The Sample Applications and StartUpCtl application installs on the device and the Sample Applications window
appears.
After a warm or cold boot, the Sample Applications
window appears automatically.
StartUpCtl Application Configuration
StartUpCtl application can be used to automatically launch any application whenever a warm or cold boot is
performed.
Refer to the StartUpCtl instruction available with the StartUpCtl software download available on the Support Central
web site: http//www.zebra.com/support.
Removing Sample Applications and StartUpCtl Application
To remove the installed applications (before a cold boot is performed):
1 Tap Start > Setting > Control Panel > Remove Programs icon.
2 Select Motorola Samples.C from the list.
3 Tap the Remove button.
4 Tap the Yes
button.
5 Select Motorola startUpCtl from the list.
6 Tap the Remove button.
7 Tap the Yes button.
8 Tap OK.
142 | Settings for WinCE Devices
April 2015 | MN000887A01-B
To Next Page
Loading...
Need help?
General