Chapter
3
USB Communication
Note: This chapter applies to Android devices only.
This chapter provides information for transferring files between the device and a host computer.
Connecting to a Host Computer via USB
Connect the MC32N0 to a host computer using the Single Slot Serial/USB cradle or USB Client Charge cable to
transfer files between the MC32N0 and the host computer.
Caution:
When connecting the MC32N0 to a host computer, follow the host computer’s instructions for connecting
and disconnecting USB devices, to avoid damaging or corrupting files.
Connecting to the MC32N0 as a Media Device
Note: Using Media Device, you can copy files to either the microUSB card or internal memory.
Procedure:
1 Connect the USB Client Charge cable to the MC32N0 and then to the host computer or place the MC32N0 into a
Single Slot Serial/USB cradle that is connected to a host computer.
Connected as a media device or Connected as an installer appears on the Status bar.
2 If Connected as an installer appears, pull down the Notification shade and touch Connected as an installer and
then touch Media device (MTP).
3 On the host computer, open a file explorer application.
4 Locate the MC32N0 as a portable device.
5 Open the SD card or the Internal storage folder.
6 Copy or delete files as required.
Connecting to the MC32N0 as an Installer
Note: Using Installer, you can only copy files to the microUSB card.
Procedure:
1 Connect the USB Client Charge cable to the MC32N0 and then to the host computer or place the MC32N0 into a
Single Slot Serial/USB cradle that is connected to a host computer.
Connected as a media device or Connected as an installer appears on the Status bar.
55 | USB Communication
MN000887A01-B | April 2015
To Next Page
Loading...
Need help?
General