Keystroke Output
Use to configure the Keystroke Output Plug-in for the profile.
• Enabled — Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled (default
- enabled).
• Action key character - Enables decoding of a special character embedded within a bar code data for use in native
Android applications. This feature is helpful when populating or executing a form.
- None - Action key character feature is disabled (default).
- Tab - Tab character code in a bar code is processed. When DataWedge detects this character code in a bar
code, move the focus to the next field.
- Line feed - Line feed character code in a bar code is processed. When DataWedge detects this character code
in a bar code, move the focus to the next field.
- Carriage return - Carriage return character code in a bar code is processed. When DataWedge detects this
character code in a bar code, move the focus to the next field.
• Advanced data formatting - is a way to customizing data before transmission. Use advanced data formatting
(ADF) to edit scan data to suit requirements.
- Enable - Enables or disables ADF. A check in the checkbox indicates that ADF is enabled (default - disabled).
- Rules - ADF uses rules to customize data. These rules perform detailed actions when the data meets certain
criteria. One rule may consist of single or multiple criteria applied to single or multiple actions. See
Generating Advanced Data Formatting Rules on page 75 for more information.
• Basic data formatting - Allows the configuration of any data formatting for the related Output Plug-in. When the
plug-in is disabled, any data is passed on without modification.
- Enabled - Enables or disables Basic Data Formatting. A check in the checkbox indicates that it is enabled
(default - enabled).
- Prefix to data - Add characters to the beginning of the data when sent.
- Suffix to data - Add characters to the end of the data when sent.
- Send data - Set to transfer the captured data to the foreground application. Disabling this option prevents the
actual data from being transmitted. However, the prefix and suffix strings, if present, are still transmitted even
when this option is disabled (default - enabled).
- Send as hex - Set to send the data in hexadecimal format. A check in the checkbox indicates that the plug-in is
enabled (default - disabled).
- Send TAB key - Set to append a tab character to the end of the processed data. A check in the checkbox
indicates that the plug-in is enabled (default - disabled).
- Send ENTER key - Set to append an Enter character to the end of the processed data. A check in the
checkbox indicates that the plug-in is enabled (default - disabled).
Intent Output
Allows configuration of the Intent Output Plug-in for the profile. The Intent Output Plug-in allows the captured data
to be sent to an application in the form of an implicit Intent. Refer to the Android Developer web site for more
information, http://developer.android.com.
• Enabled - Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled (default -
disabled).
• Intent action - Enter the Intent Action name (required).
• Intent category - Enter the Intent Category name (required).
• Intent delivery - Select the method by which the intent is delivered:
- Send via StartActivity
- Send via startService (default)
- Broadcast intent
70 | DataWedge Configuration
April 2015 | MN000887A01-B
To Next Page
Loading...
Need help?
General