3 - CONTROLS AND INSTRUMENTS
Ground Speed PTO (GSP) lever (optional)
Ground Speed PTO (GSP) lever (Optional)
•
This lever (1) is used to select the ground speed PTO
(GSP) or independent PTO.
•
The ground speed PTO rotates proportionally according
to the rear wheel speed. The independent PTO rotates
proportionally according to the engine speed regardless
of the rear wheel speed.
•
If you pull the lever (1) backward, the ground speed
PTO (GSP) is engaged.
•
If you push the lever (1) forward fully, the ground speed
PTO (GSP) is disengaged and the independent Power
Take-Off (PTO) is made available.
NHIL22CT00324AA 1
Before operating this lever, do the following:
•
Press down the clutch pedal, brake pedals, and stop
the tractor completely.
•
Put the PTO switch to “OFF” position and stop the PTO
shaft completely.
3-47
To Next Page
Loading...
Need help?
General
