7 - MAINTENANCE
Wheel bolt / nut - Tighten
WARNING
Roll-over hazard!
Never operate the machine with a loose wheel rim or disc. Always tighten nuts and/or bolts to the
speciîš¿ed torque value and at the recommended intervals.
Failure to comply could result in death or serious injury.
W0346B
Tighten the wheel bolts (1) and nuts (2) to the speciîš¿ed
torque any time you remove the wheel assembly from
the tractor or when you loosen the wheel bolts.
Front Wheel Torque
•
176 – 196 N·m (130 – 145 lb ft)
93100874 1
Rear Wheel Torque
•
176 – 196 N·m (130 – 145 lb ft)
NOTICE: Check and tighten wheel bolts (1) and nuts (2)
to proper torque speciîš¿cations after the following hours of
use:
•
First 5 hours
•
First 50 hours
•
Every 300 hours
93100875A 2
Fuel îš¿lter water separator - Replace
See 7-40.
7-26
To Next Page
Loading...
Need help?
General
