New Holland Boomer 50 User Manual

7 - MAINTENANCE
Maintenance planning
Maintenance chart
Bleed
Grease
Tighten
Cleaning
Replace
Drain uid
Change uid
Adjust
Tire inating
Test
Check
Maintenance action Page no.
Prior to starting the engine
Engine compartment - Check
x
7-17
Tire pressure and wheel hardware torque
x
7-18
Brake and clutch operation - Check
x
7-19
Instrument panel and indicator lights - Prior to starting the engine
Front panel warning light indicator - Check
x
7-20
Every 10 hours or daily
Engine oil level - Check
x
7-20
Engine cooling system - Check
x
7-22
After rst 50 hours
Engine oil and oil lter - Change
x
7-23
Hydraulic oil lter - Replace
x
7-25
Hydraulic (HST) oil lter - Replace
x
7-25
Wheel bolt / nut - Tighten
x
7-26
Fuel lter water separator - Replace
x
7-26
Every 50 hours
Grease ttings
x
7-27
Transmission uid level - Check
x
7-28
Clutch pedal free play - Check
x
7-29
Brake pedal free play - Check
x
7-30
Hydrostatic transmission (HST) neutral adjustment
- Check
x
7-30
Engine belts - Check
x
7-31
Wheels and tires pressure - Check
x
7-32
Front axle and differential oil level - Check
x
7-34
Air cleaner - Clean - Primary element
x
7-35
Every 100 hours
Fuel lter - Drain
x
7-38
Every 300 hours
Engine oil and oil lter - Change
x
7-39
Hydraulic oil lter - Replace
x
7-39
Hydrostatic Transmission (HST) oil lter - Replace
x
7-39
Engine belts - Check
x
7-39
Wheel bolt / nut - Check
x
7-39
Air cleaner primary element - Replace
x
7-39
Every 500 hours
Fuel lter water separator - Replace
x
7-40
Cab air lter - Replace
x
7-43
Every 600 hours
Front axle differential uid - Change
x
7-45
Transmission uid - Change
x
7-47
Every 1000 hours
Air cleaner inner element - Replace
x
7-48
Every 1500 hours
Engine coolant - Draining and ushing - Cab
x
7-49
7-12

New Holland Boomer 50 Specifications

General

Transmission	Hydrostatic
Fuel Capacity	11.9 gal
Lift Capacity	2, 756 lbs
Drive	4WD
PTO Speed	540 rpm