6 - WORKING OPERATIONS
6 - WORKING OPERATIONS###_6_###
General information
Roll Over Protective Structure (ROPS) Fold up/down
DANGER
Roll-over hazard!
A folded Roll-Over Protective Structure (ROPS) does not provide roll-over protection. Do not operate
the machine with the ROPS folded as a standard operating mode. Raise the ROPS immediately after
low clearance use or transport.
Failure to comply will result in death or serious injury.
D0058A
DANGER
Crushing hazard!
Always wear the seat belt when operating the machine with the Roll Over Protective Structure (ROPS)
in the upright position. If the ROPS is in the folded position, the seat belt should not be used. Raise
the ROPS and wear the seat belt as soon as conditions allow.
Failure to comply will result in death or serious injury.
D0139A
WARNING
Avoid injury!
Always follow the procedure in this manual when you fold or unfold the Roll-Over Protective Structure
(ROPS).
Failure to comply could result in death or serious injury.
W1506A
WARNING
Machine damage can cause accidents!
While driving, make sure the Roll Over Protective Structure (ROPS) is correctly positioned to avoid
any damage. The ROPS and interconnecting components are a certiîš¿ed system. Any damage reduces
protection and weakens the structure.
Failure to comply could result in death or serious injury.
W0934A
CAUTION
Heavy parts!
The Roll Over Protective Structure (ROPS) is a heavy assembly. Use caution when you fold and stand
the upper ROPS frame.
Failure to comply could result in minor or moderate injury.
C0141A
6-1
To Next Page
Loading...
Need help?
General
