4 - OPERATING INSTRUCTIONS
Roll Over Protective Structure (ROPS) - CAB
WARNING
Uncontrolled equipment movement!
Some mounted and semi-mounted equipment may collide with cab, causing damage. You could be
injured by broken glass, and/or the Roll Over Protective Structure (ROPS) could be damaged. Always
adjust equipment as instructed in this manual.
Failure to comply could result in death or serious injury.
W0426A
WARNING
Roll-over hazard!
After an accident, re, tip over, or roll over, a qualied technician MUST replace the Roll-Over Protec-
tive Structure (ROPS) before returning the machine to the eld or job site operation.
Failure to comply could result in death or serious injury.
W0134A
NHIL22CT00299GA 1
4-27