3 - CONTROLS AND INSTRUMENTS
Parking brake - Roll Over Protective Structure (ROPS)
WARNING
Unexpected movement!
Always engage the parking brake and switch off the engine before exiting the machine.
Failure to comply could result in death or serious injury.
W0209A
NOTICE: Ensure the park brake is fully disengaged before driving the tractor.
The park brake lever (1) is located on the left-hand side of the operator’s platform. Use the park brake to apply the
rear axle brakes to prevent the tractor from moving while parked.
To engage the park brake, lock the pedals together and pull the park brake lever up while pressing the brake pedals
down.
NOTE: Always engage the park brake when getting off the tractor. Engage the park brake before the operator leaves
the seat or an alarm will sound. The alarm will continue to sound for approximately ten seconds or until the operator
engages the park brake.
To disengage the park brake, press the brake pedals down, push button (2) in the end of the park brake lever to
release lever and push the lever (1) downward.
NHIL22CT00330AA 1
3-53
To Next Page
Loading...
Need help?
General
