7 - MAINTENANCE
Every 50 hours
Grease îš¿ttings
NOTE: After every 50 hours of normal operation, apply a
good quality grease to the lubrication points listed below
(refer to the Recommended Lubricants chart). When oper-
ating under extremely dirty conditions, lubricate more fre-
quently than every 50 hours.
NOTE: Front axle grease îš¿ttings
•
Front axel pivot (1), rear axle pivot (2).
NHIL22CT00068AA 1
•
Tie rod ends (Left-hand and right-hand sides) (2)
NHIL22CT00067AA 2
•
3-Point Linkage (3)
To lubricate these points:
1. Wipe away all old grease and dirt from the lubrication
îš¿ttings to prevent dirt or foreign material from entering
as new grease is applied.
2. Use a grease gun to apply new grease to îš¿ttings.
3. Wipe away any excess grease.
NHIL22CT00069AA 3
7-27
To Next Page
Loading...
Need help?
General
