New Holland Boomer 50 User Manual

4 - OPERATING INSTRUCTIONS
Engine Speed Management (ESM) Roll Over Protective Structure
(ROPS)
The Engine Speed Management (ESM) function allows
the operator to select and save a specic engine speed
and return to that speed with the push of a single button.
The Engine Speed Management (ESM) main switch (1)
controls the Engine Speed Management (ESM) function.
•
Position (C) Enable/Save (momentary position)
•
Position (B) On
•
Position (A) Off
Moving the Engine Speed Management (ESM) main
switch from position (A) to position (B) will cause:
•
The ESC indicator (3) on the instrument panel will blink.
•
The engine speed (4) stored in the ECU to display on
the LCD panel.
Depressing the Engine Speed Management (ESM) main
switch from position (B) to position (C) will cause:
•
Momentarily depress the Engine Speed Management
(ESM) main switch to enable and recall the last saved
engine speed. The Engine Speed Management (ESM)
indicator (3) will change to solid.
NOTE: The park brake must be released and the
brakes cannot be depressed for the Engine Speed
Management (ESM) to activate.
•
Depress and hold the Engine Speed Management
(ESM) main switch for 2 s in the position (C) to save
the current engine speed into the memory for recall.
The stored engine speed (4) will blink three times on
the LCD panel.
NHIL22CT00315AA 1
NHIL17CT01046AA 2
4-3

New Holland Boomer 50 Specifications

General

Transmission	Hydrostatic
Fuel Capacity	11.9 gal
Lift Capacity	2, 756 lbs
Drive	4WD
PTO Speed	540 rpm