7 - MAINTENANCE
Every 600 hours
Front axle differential uid - Change
WARNING
Maintenance hazard!
Before you start servicing the machine, always attach a DO NOT OPERATE warning tag to the machine
in a visible area.
Failure to comply could result in death or serious injury.
W0004B
Changing front axle differential and îš¿nal reduction gear case oil
NOTE: The front axle differential case and îš¿nal reduction gear case oil should be changed after every 600 operating
hours.
1. Place a suitable container (A) beneath the oil plugs.
With the oil at normal operating temperature, drain the
oil by removing the drain plugs (1).
NHIL22CT00023AA 1
NHIL22CT00024AA 2
2. After the oil has drained, install the drain plugs, and
discard the used oil.
3. Remove the îš¿ller plug (2) and check plugs (3).
4. Fill the axle with HYPOID GEAR OIL EP SAE 80W-90 oil
until the oil ows out of the oil level check plug port (3).
Install the îš¿ller and check plugs, hand tight only.
NHIL22CT00024AA 3
7-45
To Next Page
Loading...
Need help?
General
