Section 5 Object Operations 5-5 Layout Functions
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
3. Move the cursor towards the node. When the cursor has changed to a cross (+), drag the cursor to
the new position for the node.
4. Click the right mouse button to close the edit mode for nodes.
Adding Nodes
1. Select the fixed object to which a node is to be added.
2. Select Layout – Edit – Add Node.
The fixed object nodes will be displayed.
When the cursor is placed on the border of the fixed object, the cursor will change to the following
shape.
3. Click the position on the border where a node is to be added. A node will be added between two
existing nodes. Nodes can be added until there are only 4 dots or less between two nodes.
4. Click the right mouse button to close the add mode for nodes.
Removing Nodes
1. Select the fixed object from which a node is to be removed.
2. Select Layout – Edit – Remove Node.
The fixed object nodes will be displayed.
The cursor will change to the following shape when brought close to a node.
3. Click the node to be removed.
4. Click the right mouse button to close the remove mode for nodes.
5-32
To Next Page
Loading...
Need help?
General
