Section 5 Object Operations 5-8 Displaying and Searching Functional Object Lists
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
5-8 Displaying and Searching Functional Object Lists
Lists of property settings for functional objects in each screen can be displayed and checked and the
order of the listed properties (ID No., comment, label, address, font name, text color, text attributes,
color, etc.) can be changed. Also, the display can be changed, using the jump function, to the position
of a specified functional object.
1. Either select Tools – Functional Object List or click the Functional Object List Button on the
toolbar.
Toolbar
The Functional Object List Dialog Box will be displayed.
1
2
No. Setting Details
1 Range Select the range for the functional object list display from Current Screen, Whole
Project, or Screens. If As Sheet No is selected (turned ON), the functional objects in
sheets will be the range for the list.
2 Address Display
Method
Select the address display method from the following options.
Multiple Ad-
dresses in 1
Line
The addresses set for one functional object are displayed horizontally on one line.
One Address
in 1 Line
(Displayed in
Multiple Line)
The addresses set for one functional object are displayed vertically over multiple
lines.
2. Make the settings and then click the Display Button.
3. The Functional Object List Window will be displayed.
5-42
To Next Page
Loading...
Need help?
General
