Omron NS User Manual

Section 1 Overview 1-5 Menu Commands
NS-Designer Operation Manual
Fixed Objects Menu
Command Function
Rectangle Starts creation of a rectangle.
Circle/Oval Starts creation of a circle or oval.
Straight line Starts creation of a straight line.
Polyline Starts creation of a continuous straight line.
Polygon Starts creation of a polygon.
Sector Starts creation of a pie-shaped sector.
Arc Starts creation of an arc.
Settings Menu
Command Function
Object Properties Sets the properties of the selected functional object.
Edit Label Enables direct editing of labels on the screen without opening a property dialog
box.
Change Settings at Once Enables editing the basic properties of the selected functional objects in a table.
Functional objects can be added and deleted as well.
Flicker Setting Sets the flicker operation parameters.
Password Setting Sets the password.
Unit/Scale Setting Displays the unit and scale conversions for a numeral display.
Alarm/Event Setting Set the alarm function (addresses, messages, etc.).
Data Log Setting Set the data log function (e.g., data log groups).
Data Block Setting Performs registration and correction of data blocks.
Change Input Order Sets the order for shifting the focus for objects that can be input.
Project Properties Sets the project properties.
Screen Properties Sets the screen properties.
System Setting Sets the PT operating parameters.
Reset Defined Default Resets all of the settings made for an object. (Functional and fixed objects)
Change PT Model Sets the model of the NS-series PT.
Register Host Registers the host.
Layout Menu
Command Function
Align/ Distribution Aligns the position of more than one selected object. (Left, Center in a Column,
Right, Top, Center in a Row, Bottom, Distribute Horizontally, or Distribute Verti-
cally)
Make Same Size Sizes all selected objects horizontally and vertically to the same size as that of the
largest or smallest object.
Order Moves the selected object to the front or back.
Nudge Moves the selected object one bit or one grid unit up, down, right, or left.
Rotate/Flip
Rotates or flips an object. (90 Degrees Clockwise, 90 Degrees Counterclockwise,
Flip Vertical, Flip Horizontal, Rotate Right 90 Degrees Around Center of
Screen/Frame, Rotate Left 90 Degrees Around Center of Screen/Frame, Flip
Horizontal Around Center of Screen/Frame, or Flip Vertical Around Center of
Screen/Frame)
Modify Edits the shape of a fixed object. (Edits, adds, or deletes nodes.)
Group Groups objects.
Ungroup Ungroups a group of objects.
Grid Sets the grid.
1-20

Omron NS Specifications

General

Brand	Omron
Model	NS
Category	Touch terminals
Language	English