Omron R88D-KN series User Manual

1
Introduction
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Introduction
Thank you for purchasing a G5-series Servo Drive. This manual explains how to install and wire the
Servo Drive, set parameters needed to operate the Servo Drive, and remedies to be taken and
inspection methods to be used should problems occur.
This manual is intended for the following individuals.
Those having electrical knowledge (certified electricians or individuals having equivalent knowledge)
and also being qualified for one of the following:
• Introducing FA equipment
• Designing FA systems
• Managing FA sites
This manual contains information you need to know to correctly use the Servo Drive and peripheral
equipment. Before using the Servo Drive, read this manual and gain a full understanding of the
information provided herein.
After you finished reading this manual, keep it in a convenient place so that it can be referenced at any
time.
Make sure this manual is delivered to the end user.
Intended Readers
Notice

Omron R88D-KN series Specifications

General

Brand	Omron
Model	R88D-KN series
Category	Controller
Language	English