Omron R88D-KN series User Manual

12 Troubleshooting and Maintenance
12-28
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
12-5 Periodic Maintenance
Linear Sliders and Servo Drives contain many components and will operate properly only when each of
the individual components is operating properly. Some of the electrical and mechanical components
require maintenance depending on application conditions. Periodic inspection and replacement are
necessary to ensure proper long-term operation of Linear Sliders and Servo Drives. (Quoted from The
Recommendation for Periodic Maintenance of a General-purpose Inverter published by JEMA.)
The periodic maintenance cycle depends on the installation environment and application conditions of
the Linear Sliders and Servo Drives. Recommended maintenance times are given below for Linear
Sliders and Servo Drives. Use these for reference in periodic maintenance.
Caution
After replacing the unit, transfer to the new unit all data
needed to resume operation, before restarting the operation.
Equipment damage may result.
Never repair the product by disassembling it.
Electric shock or injury may result.

Omron R88D-KN series Specifications

General

Brand	Omron
Model	R88D-KN series
Category	Controller
Language	English