1-4
1
Confirmations upon Delivery
îš‹ Checks
Check the following items as soon as the Inverter is delivered.
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or
your OYMC representative immediately.
îš‹ Nameplate Information
There is a nameplate attached to the side of each Inverter. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Inverter.
îš„ Example Nameplate
The following nameplate is an example for a standard domestic European Inverter: 3-phase, 400 VAC,
0.55 kW, IEC IP20 and NEMA 1 standards
Fig 1.1 Nameplate
Item Method
Has the correct model of Inverter been
delivered?
Check the model number on the nameplate on the side of the Inverter.
Is the Inverter damaged in any way?
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Are any screws or other components
loose?
Use a screwdriver or other tools to check for tightness.
Inverter model
Input specifications
Output specifications
Lot number
Serial number
Inverter
specifications
Mass
OUTPUT: AC3PH 0-480V 0-400Hz 1.8A 1.4kVA
MODEL: CIMR-F7Z40P4
To Next Page
Loading...
Need help?
General